Going for a bike ride is an excellent way to exercise. The strain on knees and shins caused by running can be relieved by going for a ride. Traditional bikes like ten-speeds are often the first thought of most new riders, but there has been a strong surge towards recumbent bicycles. The design is different because they allow you to sit back and enjoy the scenery. Before your first ride, there are a few differences that you need to learn.
These bikes have a different way of mounting. Swing your leg forward over the frame rather than backward. Remember, the seat is a reclining style. Swinging your leg over backward will result in you kicking the seat and possibly toppling over.
Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.
Be sure to hold the brake when getting on or off. This may seem like common sense, but it is more important on this style of bike. Until you are used to getting on the bike, this will simplify the first and last step of the ride.
Use the gears for easier riding. Some like to use a more difficult gear to get a harder work out on ten speeds, but on this bike, it is better to start in a low gear and work your way up as you need.
There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.
While riding the bike, sit back and relax. This is designed with this purpose in mind. On other bikes, you lean forward and are looking at the ground just in front of you. Here, you actually need to look up and forward so you can use the bike to its full potential.
Use the pedal, not your foot, to push start. You might be used to pushing off from the ground and then start pedaling. This cycle starts by pushing the pedal and moving your ground foot up to continue the effort. Being in a reclining position will prevent you from adequately pushing off with your ground foot.
Stopping is a coordinated effort. At first, it might seem difficult, but stopping the bike is much the same that kids do when they first learn to ride a cycle. Apply the brake, then put both feet down on the ground and as you stand up, straighten the wheels.
Enjoying the scenery and avoiding strain are two big benefits of these bikes. Once you get a couple of good starts on the cycle, you will naturally get a feel for how it works. It is different in some ways, but you will find that you ride longer and farther without tiring as much.
These bikes have a different way of mounting. Swing your leg forward over the frame rather than backward. Remember, the seat is a reclining style. Swinging your leg over backward will result in you kicking the seat and possibly toppling over.
Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.
Be sure to hold the brake when getting on or off. This may seem like common sense, but it is more important on this style of bike. Until you are used to getting on the bike, this will simplify the first and last step of the ride.
Use the gears for easier riding. Some like to use a more difficult gear to get a harder work out on ten speeds, but on this bike, it is better to start in a low gear and work your way up as you need.
There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.
While riding the bike, sit back and relax. This is designed with this purpose in mind. On other bikes, you lean forward and are looking at the ground just in front of you. Here, you actually need to look up and forward so you can use the bike to its full potential.
Use the pedal, not your foot, to push start. You might be used to pushing off from the ground and then start pedaling. This cycle starts by pushing the pedal and moving your ground foot up to continue the effort. Being in a reclining position will prevent you from adequately pushing off with your ground foot.
Stopping is a coordinated effort. At first, it might seem difficult, but stopping the bike is much the same that kids do when they first learn to ride a cycle. Apply the brake, then put both feet down on the ground and as you stand up, straighten the wheels.
Enjoying the scenery and avoiding strain are two big benefits of these bikes. Once you get a couple of good starts on the cycle, you will naturally get a feel for how it works. It is different in some ways, but you will find that you ride longer and farther without tiring as much.
About the Author:
You can get a detailed overview of the things to consider when buying recumbent bicycles and view our selection of bicycles at http://www.utahtrikes.com/PROD-11617617.html right now.
No comments:
Post a Comment